Plasma Collision - and 3.0 Walkthrough
Author |
Message |
skidrow
Rank 17
Joined: Fri Nov 21, 2014 10:37 pm Posts: 544
|
Go out from your room and follow the slim and you find it 
|
Mon Jan 26, 2015 6:33 pm |
|
 |
TheBeatles
Rank 1
Joined: Thu Jan 29, 2015 9:51 am Posts: 2
|
Can't slide the card on 16th floor. There's some kind of invisible wall...
|
Thu Jan 29, 2015 9:57 am |
|
 |
skidrow
Rank 17
Joined: Fri Nov 21, 2014 10:37 pm Posts: 544
|
Wrong floor it at 17 or 19 you should go.
Last edited by skidrow on Fri Jan 30, 2015 9:37 pm, edited 2 times in total.
|
Thu Jan 29, 2015 6:35 pm |
|
 |
Malachai
Rank 15
Joined: Wed Apr 10, 2013 5:49 pm Posts: 230
|
TheBeatles wrote: Can't slide the card on 16th floor. There's some kind of invisible wall... You don't use your card when you get to the required floor. You need to use your mouse cursor to click and hold down on the device next to the door. It's a thumb scanner. I was fooled by that in the beginning as well.
|
Thu Jan 29, 2015 7:12 pm |
|
 |
TheBeatles
Rank 1
Joined: Thu Jan 29, 2015 9:51 am Posts: 2
|
Malachai wrote: TheBeatles wrote: Can't slide the card on 16th floor. There's some kind of invisible wall... You don't use your card when you get to the required floor. You need to use your mouse cursor to click and hold down on the device next to the door. It's a thumb scanner. I was fooled by that in the beginning as well. Thank you. It worked.
|
Sat Jan 31, 2015 2:59 am |
|
 |
ottawaguy05
Rank 2
Joined: Fri Jul 01, 2016 8:37 pm Posts: 3
|
Hey folks,
so all steps followed, container in the left pod and closed, servers on, reactors powered valves open. set the shift on reactor 2 to 17.5, got collision and maxed the speed, eventually reads portal stable, meanwhile reactor 1 was set at 20.5 max speed read collision, no portal just the smallest flicker, and it stays that way. What am I missing???
|
Fri Jul 01, 2016 8:43 pm |
|
 |
skidrow
Rank 17
Joined: Fri Nov 21, 2014 10:37 pm Posts: 544
|
ottawaguy05 wrote: Hey folks,
so all steps followed, container in the left pod and closed, servers on, reactors powered valves open. set the shift on reactor 2 to 17.5, got collision and maxed the speed, eventually reads portal stable, meanwhile reactor 1 was set at 20.5 max speed read collision, no portal just the smallest flicker, and it stays that way. What am I missing??? Make sure you dont have -
|
Fri Jul 01, 2016 10:43 pm |
|
 |
ottawaguy05
Rank 2
Joined: Fri Jul 01, 2016 8:37 pm Posts: 3
|
skidrow wrote: Make sure you dont have -
reactor one is set to +20.5, not negative 20.5. It is producing a spark but just stays small, does not get bigger over time like the other one.
|
Sat Jul 02, 2016 12:08 am |
|
 |
skidrow
Rank 17
Joined: Fri Nov 21, 2014 10:37 pm Posts: 544
|
ottawaguy05 wrote: skidrow wrote: Make sure you dont have -
reactor one is set to +20.5, not negative 20.5. It is producing a spark but just stays small, does not get bigger over time like the other one. Then you probably dont have it at full speed.
|
Sat Jul 02, 2016 8:13 am |
|
 |
ottawaguy05
Rank 2
Joined: Fri Jul 01, 2016 8:37 pm Posts: 3
|
Then you probably dont have it at full speed.[/quote]
1140 is max speed. maybe the container isn't perfectly centered in the chamber is whats causing issues or something (I put it in the middle of the place me here square)
I tried again from scratch and followed the order of the pop ups, screens, reactors power, then the container, reactor valves, injected plasma, set #1 to 20.5 speed to 1140, #2 17.5 speed 1140, after 10 mins of so the #2 portal stabilized, no change to #1 after 20 mins, tried going to city view advancing time an hour went back and waited another 20 minutes, for absolutely nothing.
What am I missing here folks?
|
Sun Jul 03, 2016 2:55 pm |
|
 |
|
Who is online |
Users browsing this forum: No registered users and 18 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|