|
Page 1 of 1
|
[ 10 posts ] |
|
Author |
Message |
linoleum84
Rank 11
Joined: Fri Aug 07, 2015 6:35 pm Posts: 69
|
Hi guys (girls?) I tried to make a camera compilation found on the forum. Maybe nothing new for the most of us but i would like to share it anyway  I edited some cams positions but all credits goes for the authors. No bug so far, but report if any... Go in your "pack\pack_dungeon\init\std\base\main" folder Open "main_base.dat" Copy cams below Paste in "main_base.dat" (save your original if needed) Save / Exit Run game / Enjoy Code: //////////////////////////////////////////////////////// // // Camera // //////////////////////////////////////////////////////// camera[0] { ref_type = MAIN_HIP; set = 1; pos = (-1.0,0.1,0.3); rot = (-25,-100,0); } camera[1] { ref_type = MAIN_HIP; set = 1; pos = (1.0,0.1,0.3); rot = (-25,100,0); }
camera[2] { ref_type = MAIN_HIP; body_type = PETER; set = 1; pos = (-1.0,0.5,1.1); rot = (-35,-80,0); } camera[3] { ref_type = MAIN_HIP; body_type = PETER; set = 1; pos = (1.0,0.5,1.1); rot = (-35,80,0); } camera[4] { ref_type = MAIN_HIP; set = 2; pos = (-1.0,0.1,0.3); rot = (-10,-115,0); } camera[5] { ref_type = MAIN_HIP; set = 2; pos = (1.0,0.1,0.3); rot = (-10,115,0); } camera[6] { ref_type = MAIN_HIP; body_type = PETER; pos = (-0.30,0.15,0.12); rot = (-33,-129,0); } camera[7] { ref_type = MAIN_HIP; body_type = PETER; pos = (0.30,0.15,0.12); rot = (-33,129,0); } camera[8] { ref_type = MAIN_HIP; pos = (-0.30,0.0,0.05); rot = (5,-145,0); } camera[9] { ref_type = MAIN_HIP; pos = (0.30,0.0,0.05); rot = (5,145,0); }
camera[10] { ref_type = MAIN_HIP; pos = (-0.4,-0.05,0.30); rot = (0,-90,0); }
camera[11] { ref_type = MAIN_HIP; pos = (0.4,-0.05,0.30); rot = (0,90,0); }
camera[12] { ref_type = MAIN_HIP; pos = (-0.54,-0.03,0.67); rot = (0,-90,0); }
camera[13] { ref_type = MAIN_HIP; pos = (0.54,-0.03,0.67); rot = (0,90,0); }
camera[14] { ref_type = MAIN_PENIS; pos = (0.0,-0.39,0.22); rot = (47,0,0); }
camera[15] { ref_type = MAIN_PENIS; pos = (0.0,-0.55,0.20); rot = (63,0,0); }
camera[16] { ref_type = MAIN_HIP; pos = (0,-0.6,-0.8); rot = (0.4,180,0); }
camera[17] { ref_type = CHAR_HEAD; pos = (0,0.3,-0.5); rot = (-45,180,0); }
camera[18] { ref_type = MAIN_PENIS; pos = (0.0,0.405,-0.9); rot = (-48,180,0); }
camera[19] { ref_type = CHAR_HEAD; pos = (0,-0.6,-0.5); rot = (30,180,0); }
camera[20] { ref_type = MAIN_PENIS; pos = (0.0,0.735,-0.62); rot = (-110,0,0); }
camera[21] { ref_type = MAIN_PENIS; pos = (0.0,0.04,0.12); rot = (-15,0,0); }
}
Attachments:
camscomp.jpg [ 1.68 MiB | Viewed 24862 times ]
Last edited by linoleum84 on Thu Jan 07, 2016 10:24 pm, edited 5 times in total.
|
Sat Aug 15, 2015 4:39 pm |
|
 |
tomahawk308
Rank 18
Joined: Sun Jun 22, 2014 3:46 pm Posts: 1094
|
@linoleum84 thanks 
|
Sat Aug 15, 2015 5:16 pm |
|
 |
linoleum84
Rank 11
Joined: Fri Aug 07, 2015 6:35 pm Posts: 69
|
np  thumbs up lol for ajustments use pos = (side,height,distance) rot = (look up(+)/down(-), turn rot, side rot)
|
Sat Aug 15, 2015 6:42 pm |
|
 |
machamp623
Rank 8
Joined: Mon Jan 19, 2015 12:14 am Posts: 42
|
maybe its a 3.5 thing but whenever i try this it crashes the game
|
Sun Aug 16, 2015 4:08 am |
|
 |
vargh
Rank 7
Joined: Thu Apr 17, 2014 5:40 pm Posts: 29
|
machamp623 wrote: maybe its a 3.5 thing but whenever i try this it crashes the game Be sure there is a closing curly bracket at the very end of the file. Code: camera[15] { ref_type = CHAR_HEAD;
pos = (0,-0.6,-0.5); rot = (30,180,0); } } <-- this one is a must at the end
|
Sun Aug 16, 2015 5:43 am |
|
 |
machamp623
Rank 8
Joined: Mon Jan 19, 2015 12:14 am Posts: 42
|
im literally jst copy pasting the text from this thread over the text in the file and its still crashing
|
Sun Aug 16, 2015 8:46 pm |
|
 |
linoleum84
Rank 11
Joined: Fri Aug 07, 2015 6:35 pm Posts: 69
|
you have to paste these cameras in place of the existing ones in your main_base.dat as it has been said before the last " } " is needed, check up again if u got it. should be like this : Code: [...]
max_particle_count = 4000; spawn_count = 4000; } //////////////////////////////////////////////////////// // // Camera // //////////////////////////////////////////////////////// camera[0] { ... }
.....
camera[15] { ... }
}
// end
|
Sun Aug 16, 2015 10:13 pm |
|
 |
machamp623
Rank 8
Joined: Mon Jan 19, 2015 12:14 am Posts: 42
|
it works! thank you
|
Mon Aug 17, 2015 2:34 am |
|
 |
ItsDamon
Rank 10
Joined: Thu Dec 11, 2014 3:49 pm Posts: 61 Location: Germany
|
If I try to use this With Love_party..... the game crashes...... in normal Dungeon it works very well. Is there somethig I missed here? I simply replaced the camera settings in the main.dat just as I did in the normal pack, is there are difference of editing this to Love V4 ? Im a noob in english and also in computerlanguage so please forgive me. 
|
Fri Aug 21, 2015 7:15 am |
|
 |
linoleum84
Rank 11
Joined: Fri Aug 07, 2015 6:35 pm Posts: 69
|
There should be no difference, I'm using my custom cameras with all dungeons, you maybe have done something wrong, check up again  When I unpack LoveParty v04, here is the original code i have for the cameras in main_base.dat : Code: //////////////////////////////////////////////////////// // // Camera // //////////////////////////////////////////////////////// camera[0] { ref_type = CHAR_HEAD; pos = (0,0.3,-0.5); rot = (-45,180,0); } camera[1] { ref_type = MAIN_HIP; set = 1; pos = (-1.0,0.1,0.3); rot = (-25,-100,0); } camera[2] { ref_type = MAIN_HIP; set = 1; pos = (1.0,0.1,0.3); rot = (-25,100,0); } camera[3] { ref_type = MAIN_HIP; set = 2; pos = (-1.0,0.1,0.3); rot = (-10,-115,0); } camera[4] { ref_type = MAIN_HIP; set = 2; pos = (1.0,0.1,0.3); rot = (-10,115,0); } camera[5] { ref_type = MAIN_HIP; pos = (-0.25,0.0,0.0); rot = (5,-145,0); } camera[6] { ref_type = MAIN_HIP; pos = (0.25,0.0,0.0); rot = (5,145,0); } camera[7] { ref_type = MAIN_HIP; pos = (-0.35,0.0,0.15); rot = (5,-145,0); } camera[8] { ref_type = MAIN_HIP; pos = (0.35,0.0,0.15); rot = (5,145,0); } // Penis cam uncomment for fun camera[9] { ref_type = MAIN_PENIS; pos = (0.0,0.005,0.0); rot = (0,0,0); } camera[10] { ref_type = CHAR_HEAD; pos = (0,-0.5,-0.5); //(side,height,distance) rot = (30,180,0); //(look up(+)/down(-), turn rot, side rot) } //end_love_party }
You see there is 2 brackets "}" at the end of the file, just replace with the code in 1st post and it should work, check again the two end brackets. Hope you'll get it 
|
Fri Aug 21, 2015 1:14 pm |
|
 |
|
|
Page 1 of 1
|
[ 10 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 57 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|